Single-use spray adhesive for permanent adhesion. Acid-free spray adhesive consisting of a synthetic base with solvents. Suitable for most materials such as foam, felt, textiles, insulation materials, polystyrene foam, plastics, foils, paper, cardboard, wood etc. Not suitable for use with synthetic leather or other materials with plasticizers or softeners (e.g. softened PVC).

Always test before use. Can be applied to one or both bonded surfaces. Final adhesion is achieved after 24 hours. Can be applied in a temperature range of - 10°C to + 50°C depending on the materials used and their weight. No penetration when used on textiles. Suitable for craft and papermaking. Clean and effective when applied to small or large areas. Shake can well, apply to clean, dry and degreased surfaces. The optimum distance of spraying from the object is 20 - 30 cm. Spray onto surfaces and allow to evaporate for 3-10 minutes (depending on outside temperature and surface absorbency). Then squeeze firmly. For porous, uneven or absorbent surfaces it is recommended to apply a thin layer of adhesive spray, allow to dry for 5 minutes and then proceed as above.