Prodaja je završena

Palmer PGA 04 Attenuator Load Box

Name: Palmer PGA 04 Attenuator Load Box
Brand: Palmer
SKU: 242325
Price: 549.00 EUR
Availability: Discontinued

Brend: Palmer

Kod proizvoda: 242325 (PGA04)

Prodaja je završena

Palmer PGA 04 Attenuator Load Box

Brend: Palmer

Kod proizvoda: 242325 (PGA04)

Prodaja je završena

Ovaj proizvod se ne proizvodi ili nije deo trenutne ponude. Preporučujemo da izabereš alternativni proizvod.

Palmer PGA 04 Attenuator Load Box

Izaberi alternativu (2)

Splitter effect. Converting the hi-Z guitar signal, the FET input circuitry also drives a transformer which routes the ungrounded signal to the output to eliminate ground loop hum. 9V battery operation is recommended. Can also be used as a line driver for long cable runs and features a phase reverse switch for the AMP 2 output when using...

Opis
Parametri i specifikacija
Pitanja i odgovori
Dokumenti

Palmer PGA 04 Attenuator Load Box

Detaljan opis na vašem jeziku još uvek nije dostupan. Možda će ti opis na engleskom za sada pomoći.

Product type:                              Speaker Simulators
Channels:                                   1
Input type:                                  unbalanced
Inputs:                                        1
Input connectors:                      6.3 mm Jack
Output type:                               unbalanced, balanced
Outputs:                                     2
Output connectors:                    XLR, 6.3 mm Jack
Output impedance:                    600 (XLR), 10 k (6.3 mm Jack) Ohm(s)
Controls:                                    volume, low, high cut, high, ground lift, fullrange
                                                  volume, filter volume, colour
Dummy load:                              yes
Dummy load impedance:            8 Ohm(s)
Max. load:                                  100 W
Voicing filter:                              yes
Power attenuator:                      no
Transformer isolated outputs:    yes
Cabinet material:                       sheet steel
Cabinet surface:                        powder coated
Width:                                        480 mm
Width:                                        19"
Depth:                                       180 mm
Height:                                       44.5 mm
Height:                                       1 U
Weight:                                      2.56 kg