Albanija
Argentina
Australija
Austrija
Belgija
Bosna i Hercegovina
Brazil
Crna Gora
Danska
Estonia
Filipini
Finska
Francuska
Hrvatska
Irska
Južna Afrika
Kanada
Kolumbija
Letonija
Litvanija
Luksemburg
Mađarska
Meksiko
Moldavija
Nemačka
Nizozemska
Norveška
Novi Zeland
Poljska
Portugal
Rumunija
Severna Makedonija
Sjedinjene Američke Države
Slovenija
Srbija
Turska
Ujedinjeno Kraljevstvo
Ukrajina
Češka
Čile
Španija
Švajcarska
Švedska
Do you have to sit behind the wheel unplanned and need to quickly determine the level of alcohol in your body? Get a quality alcohol tester BACtrack Trace Pro, which, thanks to the patented Xtend Fuel Cell technology, ranks among the most accurate devices of its kind. The tester impresses not only with accurate measurements, but also with its...
BACtrack Trace Pro Tester za alkohol
Do you have to sit behind the wheel unplanned and need to quickly determine the level of alcohol in your body? Get a quality alcohol tester BACtrack Trace Pro, which, thanks to the patented Xtend Fuel Cell technology, ranks among the most accurate devices of its kind. The tester impresses not only with accurate measurements, but also with its slim, compact design and simple operation.
- The mouthpiece ensures that only breath enters the tube, not the surrounding air
- Touch control
- Easy to read LCD display
- Blowing time: 5 - 10 seconds
Detaljan opis na vašem jeziku još uvek nije dostupan.
Možda će ti opis na engleskom za sada pomoći.
If you have purchased a BACtrack breathalyzer and need to calibrate it, simply send a request to Sunnysoft's email. Calibration is important to maintain the accuracy and optimal performance of your device.
Calibration is recommended at least every 12 months or after a maximum of 500 measurements, depending on the frequency of use. If the tester shows inaccurate or inconsistent results, or if the test values are abnormally high or low, it is necessary to have it calibrated by a professional. Also, if the tester has not been used for several weeks, it is advisable to periodically "revive" the sensor by breathing into the device to prevent it from drying out.
Calibration takes place under controlled conditions, with technicians verifying the accuracy of the device and performing various diagnostic tests. After calibration, you will receive reports on the status of the device, which will be returned in a fully functional condition.
Remember that calibration is not covered by the device warranty, which only covers manufacturing defects. For details on calibration or if you have any further questions, please contact Sunnysoft via email.
Calibration is recommended at least every 12 months or after a maximum of 500 measurements, depending on the frequency of use. If the tester shows inaccurate or inconsistent results, or if the test values are abnormally high or low, it is necessary to have it calibrated by a professional. Also, if the tester has not been used for several weeks, it is advisable to periodically "revive" the sensor by breathing into the device to prevent it from drying out.
Calibration takes place under controlled conditions, with technicians verifying the accuracy of the device and performing various diagnostic tests. After calibration, you will receive reports on the status of the device, which will be returned in a fully functional condition.
Remember that calibration is not covered by the device warranty, which only covers manufacturing defects. For details on calibration or if you have any further questions, please contact Sunnysoft via email.
Pakovanje
Paket sadrži
Država
Zemlja porekla
Kina
Sve recenzije dolaze od proverenih kupaca koji su u prošlosti kupili proizvod od nas.
Grčka
Italija
Automatizovano prevođenje
Nije moguće prevesti ovu recenziju.
Italija
Bugarska
Slovačka
Automatizovano prevođenje
Nije moguće prevesti ovu recenziju.
Dokumenti
Bezbednosna uputstva
Pogledaj uputstvo za upotrebu za detaljna bezbednosna uputstva za ovaj proizvod.
